Electrical mould-carrier systems
Our electrically driven mould-carrier systems stand out due to:
- Extremely short closing and opening times
- Smooth and low-noise movements thanks to electrical drives
- Very good energy balance
- Air cushions to ensure the consistent application of the closing force
- Little maintenance effort
- Compact design
You can also benefit from our electrically driven mould-carrier systems when using encapsulation moulds with hydraulically controlled mould functions. We can provide you with a small flexible hydraulic unit for this kind of application.
-
Mould carrier system BFT-M
BFT-G is too big for you but you do not wish to do without the fine ergonomics offered by the BFT-G? Then our BFT-M mould carrier system is exactly the right alternative for you. Mould carrier system BFT-M
-
Mould carrier system BFT-R
This mould-carrier system was specifically developed for use in the production of components on the basis of the CSM (compound spray moulding) or LFI (long-fibre injection) processes. Mould carrier system BFT-R
-
Mould carrier system BFT-K
The BFT-K mould-carrier system is ideal for glass finishing on the basis of sophisticated mould technology and a high level of automation. Mould carrier system BFT-K
-
Mould carrier system BFT-H
The BFT-H – lightweight – compact and versatile. This entry-level model offered by BBG has stood the test of time for many years, in particular in finishing small-scale automotive glass components, such as glass sunroofs. Mould carrier system BFT-H
-
Mould carrier system BFT-G
The rugged mould carrier system has been designed for accommodating large and heavy encapsulation moulds. Its special kinematics results in good ergonomics and the compact size of the mould carrier, even when it is opened. Mould carrier system BFT-G
-
Mould carrier system BFT-P V2
With its sophisticated mould technology and its high degree of automation, the high-speed BFT-P V2 mould carrier system is ideal for polyurethane applications. In addition, the BFT-P V2 stands out due to its excellent ergonomics and absolute energy efficiency. Mould carrier system BFT-P V2
-
Mould carrier system BFT-P V4
The high-speed BFT-P V4 mould-carrier system is the ideal candidate for any encapsulation applications that feed the foam into the open mould. The lower part of the mould is easy to place in an optimum position for a robot to feed the foam. Mould carrier system BFT-P V4
Mould carrier system BFT-P V4
The high-speed BFT-P V4 mould-carrier system is the ideal candidate for any encapsulation applications that feed the foam into the open mould. The lower part of the mould is easy to place in an optimum position for a robot to feed the foam. Mould carrier system BFT-P V4
